STEG MDSP-10

The STEG MDSP-10 is a powerful 8-channel DSP amplifier with an integrated 10-channel digital sound processor, enabling precise sound optimization and flexible control of modern car audio systems. With an output power of 8 x 50 watts RMS at 4 ohms and a total of 10 RCA preamp outputs, it offers numerous options for custom speaker configurations.

Thanks to the integrated DSP technology, all audio channels can be customized individually. Extensive features such as an equalizer, time alignment, all-pass filters, and an input matrix enable precise tuning to the vehicle’s acoustics. The intuitive DSP software allows all settings to be adjusted in real time and also supports the offline creation of sound setups.

The MDSP-10 features high-level and RCA inputs, as well as optical and coaxial digital inputs. This allows the amplifier to be integrated into both existing factory systems and high-quality aftermarket systems. The automatic power-on function via the high-level inputs simplifies connection to factory-installed radios.

In addition, the amplifier supports various sound presets, flexible input summing, and an optional Bluetooth expansion. A separately available control panel allows for convenient volume control and switching between saved settings.

Technical Specifications

Amplifiers and Output Power

• Amplifier Type: 8-channel DSP amplifier

• Integrated sound processor: 10-channel DSP

• RMS output power at 4 ohms: 8 x 50 watts

• Total RMS power at 4 ohms: 400 watts

• Reference voltage for the power rating: 14.4 volts

• Bridge Operation: Not Possible

• DSP Output Configuration: 8 amplified channels + 2 additional DSP channels

• Preamp outputs: 10 x RCA
  
  

Audio Inputs

• RCA inputs (low-level): 4 channels

• A/D Converter: Burr-Brown

• High-level inputs: 6 channels

• High-level input impedance: 15 ohms

• Automatic Power-On: Auto Turn-On via High-Level

• Optical Digital Input: 1 x S/PDIF

• Supported sampling rate at the optical input: 12–96 kHz

• Coaxial Digital Input: 1 x S/PDIF

• Input Matrix: Fully Configurable Input Mixer

• Input Summation: Supported
  
  

DSP Functions and Sound Settings

• 10-Channel Digital Sound Processor

• Individual Signal Processing of the Audio Channels

• Equalizer for sound correction

• All-pass filter (AP filter)

• Time Delay Correction

• Runtime correction adjustment increments: 0.02 ms

• Runtime setting in milliseconds or centimeters

• Matrix mixer for flexible signal routing

• Summing function for input signals

• Multiple storable sound presets

• Real-time adjustment of DSP settings

• Offline configuration is possible using DSP software
  
  

Connections and Control

• USB Interface for DSP Configuration

• DSP Control via PC Software

• Optional external control panel for volume control and preset selection

• Optional Bluetooth expansion for audio streaming

• Connection option for additional external amplifiers via RCA pre-outs
  
  

Operation and Dimensions

• Operating voltage: 12-volt vehicle electrical system

• Start-Stop Compatibility: Yes

• Voltage drop during start-stop: Up to 6 volts for a maximum of 5 seconds

• Width: 224 mm

• Depth: 171 mm

• Height: 49 mm

• Compact design for flexible installation options
  
  

What's Included

• 1 x STEG MDSP-10 8-Channel DSP Amplifier